Kia e-Niro

The Kia e-Niro has a large driving range of 440km. Because the Kia e-Niro can charge a maximum of 31A over 1 phase, we advise to apply energy management. This way the car can be optimally charged without the connection being overloaded.

The Kia e-Niro charges to 80% within 45 minutes when charging to a 80kW DC charger.

Realistic range: 325 - 445km • Battery capacity: 64kWh

Why E-Flux:

24/7 support

Customized advice

View your charging activity

Settlement of charging costs

Charging stations per main connection

I have a 1x35A main connection.*

Our advice: 1-phase 32A charging station 7.4 kW. The Kia e-Niro can charge up to 31A on 1-phase connection. With this charging station the car can be fully charged within 10 hours (39km/h). To prevent power outage, it is necessary to set up Dynamic Load Balancing (take extra costs into account). If charged at highest current, the Kia e-Niro will be fully charged within 10 hours.

These charging stations are suitable:

• KEBA P30 (set to 1-phase 32A 7.4kW)
• Alfen Eve mini 1-phase 32A 7.4kW
• Circontrol Wallbox Smart 1-phase 32A 7.4kW

*In case you have a lower main connection (1x20A or 1x30A) it is possible to increase it to 1x35A free of charge. Inform about this at the network administrator.

I have a 1x40A main connection.

Our advice: 1-phase 32A charging station 7.4 kW. The Kia e-Niro can charge up to 31A on 1-phase connection. With this charging station the car can be fully charged within 10 hours (39km/h). To prevent power outage, it is necessary to set up Dynamic Load Balancing (take extra costs into account). If charged at highest current, the Kona will be fully charged within 10 hours. It is also possible to statically set the maximum charge capacity to, for example, 20A. The Kia e-Niro will be fully charged within 14 hours.

These charging stations are suitable:

• KEBA P30 (set to 1-phase 32A 7,4kW)
• Alfen Eve mini 1-phase 32A 7,4kW
• Circontrol Wallbox Smart 1-phase 32A 7,4kW

I have a 3x25A main connection

Our advice: Both a 1-phase (32A 7.4KW) and 3-phase (32A, 22kW) charging station can be installed. In both cases, the Kia e-Niro will be fully charged in 12 hours when charged at 25A. To prevent power outage, we advise to use Dynamic Load Balancing. Do you want to be prepared for a future electric car? Then we advise to choose a 22kW charging station.

These charging stations are suitable:

• KeContact P30 adjustable to 7.4 or 22kW
• Alfen Eve mini 1-phase 32A 7.4kW/22kW

“I can't install a charging station at home”
Get your E-Flux mobility card to charge at +40.000 public charging stations.

Order E-Flux mobility card
laadpas E-Flux €0,15 per laadsessie

Alfen ICU Eve Mini

This Alfen ICU Eve mini is the ideal charging station for home locations, thanks to its compact size. The robust housing has the highest protection certification and gives the charging station a modern look.

  • Color display: The charging instructions are shown on the full color display.
  • No power outage: Dynamic and static load balancing possible. Dynamic load balancing takes the actual power that is available for charging the car into account. There are extra costs calculated with this because an extra meter must be installed. Alfen offers an option to order their own developed meter as an extra.
  • 24/7 support and reimbursement of costs: Including E-Flux backoffice subscription starting at €2.50 per month. Because the charging station is simlock free, it’s always possible to change to a different provider (similar to mobile phone).
Request a quote

KeContact P30

The KEBA charging station is delivered with 1 socket and can be mounted on a wall or separately on a pedestal. Because the power (Ampere) can be adjusted at any time, the KEBA can be connected to a 1-phase and 3-phase main connection.

  • Future-proof: The KEBA wallbox can be set to both 1-phase and 3-phase (3,7kW to 22kW). ’This creates flexibility for the future if the connection will be expanded because, for example, a heat pump is installed, or a new electric car is purchased with a higher charge capacity.
  • No power outage: Dynamic and static load balancing possible. Dynamic load balancing takes the actual power that is available for charging the car into account. There are extra costs calculated with this because an extra meter must be installed. At KEBA, this solution consists of placing a smart meter on the p1 port.
  • 24/7 support and reimbursement of costs: Including E-Flux backoffice subscription starting at €2.50 per month. Because the charging station is simlock free, it’s always possible to change to a different provider (similar to mobile phone).
Request a quote

CirControl WallBox Smart

The CirControl Wallbox Smart is an ideal charging station for homes due to its compact size.

  • Charge two cars at high power at the same time: This charging station can charge two cars at high power at the same time. This makes the wallbox ideal for households with two electric cars.
  • Prevent overload: Only static load balancing is possible with the CirControl. The maximum charge capacity is set in the back office. No additional hardware is needed, but having a back office makes this a lot easier. This can be remotely changed from a distance.
  • 24/7 support and reimbursement of costs: Subscription to back office via TSG Netherlands. Because the charging station is simlock free, it’s always possible to change to a different provider (similar to mobile phone).
Request a quote

Request an obligation free quote for a charging station